See also:

Rear Tail, Stop, Turn Signal, And Backup Lamp
1. Remove the two inboard screws attaching the tail light housing to the body. DO NOT REMOVE THE OUTER SCREWS AT ANY TIME. 2. Separate the housing from the body by pushing the lamp inboard while ...

Preparations For Jacking
1. Park the vehicle on a firm, level surface. Avoid ice or slippery surfaces. WARNING! Do not attempt to change a tire on the side of the vehicle closest to moving traffic, pull far enough off ...

Tires
Examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect ...