Key Ignition Park Interlock
This vehicle is equipped with a Key Ignition Park Interlock which requires the shift lever to be placed in PARK before the ignition switch can be turned to the LOCK/ OFF position. The key can only be removed from the ignition when the ignition is in the LOCK/OFF position.
Once the key is removed, the shift lever is locked in PARK.
See also:
Bulb Replacement
NOTE: Lens fogging can occur under certain atmospheric conditions. This will
usually clear as atmospheric conditions change to allow the condensation to change
back into a vapor. Turning the lamps ...
Normal Starting
NOTE: Normal starting of either a cold or a warm engine is obtained without
pumping or pressing the accelerator pedal.
Turn the ignition switch to the START position and release when the engine sta ...
Rear Liftgate Mounted Tail Lamp
1. Raise the liftgate.
2. Use a fiber stick or flat blade screw driver to pry the
lower trim from the liftgate.
3. Once lower trim is loose, close the liftgate.
4. Open the flipper glass.
5. Pul ...