How To Engage The Automatic Locking Mode
1. Buckle the combination lap and shoulder belt.
2. Grasp the shoulder portion and pull downward until the entire belt is extracted.
3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the Automatic Locking Mode.
See also:
Brake Master Cylinder
The fluid level in the master cylinders should be checked whenever the vehicle
is serviced. If necessary, add fluid to bring level to the full level mark on the
side of the reservoir of the brake ...
Closing Power Shade — Manual Mode
To close the shade, press and hold the switch in the
forward position. Any release of the switch will stop the
movement and the shade will remain in a partially closed
condition until the switch ...
List Button (CD Mode For MP3 Play)
Pressing the LIST button will bring up a list of all folders on the disc. Scrolling
up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a
folder by pressing the TUNE/SCR ...