Mist Feature

Push downward on the windshield wiper/washer control lever to activate a single wipe cycle to clear the windshield of road mist or spray from a passing vehicle.

The wipers will continue to operate until you release the lever.

NOTE: The mist feature does not activate the washer pump; therefore, no washer fluid will be sprayed on the windshield. The wash function must be used in order to spray the windshield with washer fluid.

Mist Control
Mist Control

    See also:

    If You Stall Or Begin To Lose Headway
    If you stall or begin to lose headway while climbing a steep hill, allow your vehicle to come to a stop and immediately apply the brake. Restart the engine and shift into REVERSE. Back slowly down ...

    Axle Lock (Tru–Lok ) — Rubicon Models
    The AXLE LOCK switch is located on the instrument panel (to the left of the steering column). Axle Lock Switch This feature will only activate when the following conditions are met: • Key in ...

    Going & Stopping
    Want a thrilling driving experience? This Jeep doesn't have one, but that's OK; you don't need to peel out at traffic lights if you're driving a Compass. What you need to know is that at highway s ...