Parksense Display
When the vehicle is in REVERSE, the warning display will turn ON indicating the system status.

Park Assist ON

Park Assist Off
The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone.
As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous.

Slow Tone

Fast Tone

Continuous Tone
The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone.
The following chart shows the warning alert operation when the system is detecting an obstacle:

NOTE: ParkSense will MUTE the radio, if on, when the system is sounding an audio tone.
See also:
Power Steering Fluid Check
Checking the power steering fluid level at a defined service interval is not
required. The fluid should only be checked if a leak is suspected, abnormal noises
are apparent, and/or the system is n ...
If You Stall Or Begin To Lose Headway
If you stall or begin to lose headway while climbing a steep hill, allow your
vehicle to come to a stop and immediately apply the brake. Restart the engine and
shift into REVERSE. Back slowly down ...
Tire Rotation Recommendations
The tires on the front and rear of your vehicle operate at different loads and
perform different steering, handling, and braking functions. For these reasons,
they wear at unequal rates.
These ef ...


