Transfer Case Position Indicator Lights
The four-wheel drive indicator lights (4WD and 4 LOW) are located in the instrument cluster. The NEUTRAL indicator light is located on the transfer case switch. If there is no indicator light on or flashing, the transfer case position is two-wheel drive (2WD). If the indicator light is on, the desired position (4WD LOCK, 4WD LOW, or NEUTRAL) has been obtained.
If One Or More Shift Requirements Are Not Met:
• An indicator light will flash.
• The transfer case will not shift.
NOTE: The “SERV 4WD Warning Light” monitors the electric shift four-wheel drive system. If this light remains on after engine start up, or it illuminates during driving, it means that the four-wheel drive system is not functioning properly and that service is required.
See also:
Quadra-Trac II Operating Instructions/ Precautions – If Equipped
The Quadra-Trac II transfer case is fully automatic in the
normal driving 4WD AUTO mode. The Quadra-Trac II
transfer case provides three mode positions:
• 4WD HI
• NEUTRAL
• 4WD LOW
...
Synthetic Engine Oils
Synthetic engine oils can be used if the recommended oil quality requirements
are met, and the recommended maintenance intervals for oil and filter changes are
followed. ...
Tilt Mirror In Reverse
When this feature is selected, the outside rearview mirrors
will tilt downward when the ignition switch is in the
RUN position and the transmission shift lever is in the
REVERSE position. The mi ...


