When To Use 4WD Low Range

When off-road driving, shift to 4WD LOW for additional traction and control on slippery or difficult terrain, ascending or descending steep hills, and to increase low-speed pulling power. This range should be limited to extreme situations such as deep snow, mud, or sand where additional low speed pulling power is needed.

Vehicle speeds in excess of 25 mph (40 km/h) should be avoided when in 4WD LOW range.

CAUTION!
Do not use 4WD LOW range when operating the vehicle on dry pavement. Driveline hardware damage can result.

    See also:

    Lap/Shoulder Belt Untwisting Procedure
    Use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch pl ...

    Front Passenger Easy Entry Seat — Two-Door Models
    Pull upward on the recline lever (toward the rear of the vehicle) and slide the entire seat forward. Easy Entry Lever Easy Entry Seat To return the seat to a sitting position, rotate the seat ...

    Protection Of Body And Paint From Corrosion
    Vehicle body care requirements vary according to geographic locations and usage. Chemicals that make roads passable in snow and ice, and those that are sprayed on trees and road surfaces during ot ...