Front Turn Signal And Front Side Marker Lamp

1. Turn the steering wheel all the way to the right to access the left front turn signal or side marker. Turn the steering wheel all the way to the left to access the right front turn signal or side marker.

2. Remove three push-pins from the wheel-well liner.

3. Gently flex the wheel-well liner forward to access the bulb.

4. Rotate the bulb’s socket counterclockwise, and remove the bulb and socket assembly from the housing.

5. Pull the bulb out of the socket and insert the replacement bulb.

6. Install the bulb and socket assembly into the housing, and rotate the socket clockwise to lock it in place.

7. Reposition the wheel-well liner and install the push-pins.

    See also:

    Controlling The iPod Or External USB Device Using Radio Buttons
    To get into the iPod /USB/MP3 control mode and access a connected audio device, either press the “AUX” button on the radio faceplate or press the VR button and say USB or Switch to USB . Once ...

    Troubleshooting Tips
    If you are having trouble programming HomeLink , here are some of the most common solutions: • Replace the battery in the original hand-held transmitter. • Press the LEARN button on the Garage ...

    Operating Instructions - Uconnect™ Multimedia (Satellite) Mode
    NOTE: The ignition switch must be in the ON/RUN or ACC position to operate the radio. SEEK Buttons Press and release the SEEK buttons to search for the next channel in Satellite mode. Press the ...