Front Fog Lamp

1. Open the hood.

2. Reach behind the headlamp housing to access the bulb.

3. Rotate the bulb’s socket counterclockwise, and remove the bulb and socket assembly from the fog lamp housing.

4. Pull the bulb out of the socket and insert the replacement bulb.

CAUTION!
Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol.

5. Install the bulb and socket assembly into the into the fog lamp housing, and rotate the connector clockwise to lock it in place.

6. Close the hood.

    See also:

    General Information
    This device complies with FCC rules Part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device m ...

    Tire Chains (Traction Devices)
    Use of traction devices require sufficient tire-to-body clearance. Follow these recommendations to guard against damage. • Install on Rear Tires Only • Due to limited clearance, use SAE cla ...

    Using Operator Mode
    If the Sky Slider™ is open from the front, press the switch forward and hold it, the Sky Slider™ will move forward. Release the switch to stop the Sky Slider™ travel at any point. If the S ...