Top Tether Strap Attachment

For the center seating position route the tether strap over the seatback and headrest then attach the hook to the top tether anchorage located on the back of the seat behind the gap panel. For the outboard seating positions, route the tether strap under the headrests and attach the hook to the top tether anchorage located on the back of the seat behind the gap panel. Please note the top tether anchorages are not visible until you fold the gap panel down.

Do not use the cargo tie down hooks located on the floor behind the seats.

    See also:

    Fluid Level Check
    The fluid level should be to the bottom edge of the fill hole (1) when the vehicle is in a level position. 1 — Fill Plug 2 — Drain Plug ...

    Tire Markings
    1 — U.S. DOT Safety Standards Code (TIN) 2 — Size Designation 3 — Service Description 4 — Maximum Load 5 — Maximum Pressure 6 — Treadwear, Traction and Temperature Grades NOTE: †...

    Shift Positions
    The transfer case switch is located on the center console next to the shift lever. Transfer Case Switch 2WD Rear Wheel Drive High Range - This range is used for normal street and highway driv ...