Activating Adaptive Cruise Control (ACC)
You can only activate ACC if the vehicle speed is above 20 mph (32 km/h).
When the system is turned on and in the READY state, the Electronic Vehicle Information Center (EVIC) displays “Adaptive Cruise Ready.” When the system is OFF, the EVIC displays “Adaptive Cruise Control Off.”
NOTE: You cannot enable ACC under the following conditions:
• When in Four-Wheel Drive Low.
• When you apply the brakes.
• When the parking brake is set.
• When the automatic transmission is in PARK, REVERSE or NEUTRAL.
• When pushing the RES + button without a previously set speed in memory.
See also:
To Exit Remote Start Mode Without Driving The Vehicle
Press and release the REMOTE START button one time or
allow the engine to run for the entire 15-minute cycle.
NOTE: To avoid unintentional shut downs, the system
will disable the one-time press o ...
Electronic Serial Number/Sirius Identification Number (ESN/SID)
Please have the following information available when
calling:
1. The Electronic Serial Number/Sirius Identification
Number (ESN/SID).
2. Your Vehicle Identification Number.
To access the ESN/SI ...
Loading
The vehicle maximum load on the tire must not exceed the load carrying capacity
of the tire on your vehicle. You will not exceed the tire’s load carrying capacity
if you adhere to the loading co ...


