Traction Control System (TCS)

This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability. A feature of the TCS system, Brake Limited Differential (BLD), functions similar to a limited-slip differential and controls the wheel spin across a driven axle. If one wheel on a driven axle is spinning faster than the other, the system will apply the brake of the spinning wheel. This will allow more engine torque to be applied to the wheel that is not spinning. This feature remains active even if ESC system is in the “Partial Off” mode.

Refer to “Electronic Stability Control (ESC)” in this section for further information.

    See also:

    Removing Key Fob From Ignition
    Place the shift lever in PARK. Turn the Key Fob to the OFF position and then remove the Key Fob. With the Keyless Enter-N-Go feature, the EVIC will display the ignition switch position “OFF/ACC ...

    2011 Jeep Wrangler review
    If the Donner Party had Jeeps, they never would have found themselves on the menu. Jeeps can eat up just about any trail. During a recent rock crawl through Utah, the state where the actual Donn ...

    To Exit Remote Start Mode And Drive The Vehicle
    Before the end of the 15-minute cycle, press and release the UNLOCK button on the RKE transmitter to unlock the doors and disarm the Vehicle Security Alarm (if equipped). Then, insert the key into ...