Redial

• Press the • After the “Ready” prompt and the following beep, say “Redial”. button to begin.

• After the “Ready” prompt and the following beep, say “Redial”.

• The Uconnect™ Phone will call the last number that was dialed from your mobile phone.

NOTE: This may not be the last number dialed from the Uconnect™ Phone.

    See also:

    To Unlock The Doors
    Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice to unlock all doors. The turn signal lamps will flash to acknowledge the unlock signal. The ...

    Shift Lever Override
    If a malfunction occurs and the shift lever cannot be moved out of the PARK position, you can use the following procedure to temporarily move the shift lever: 1. Firmly apply the parking brake. 2. ...

    Brake Master Cylinder
    The fluid level in the master cylinders should be checked whenever the vehicle is serviced. If necessary, add fluid to bring level to the full level mark on the side of the reservoir of the brake ...