Barge In - Overriding Prompts
The “Voice Command” button can be used when you wish to skip part of a prompt
and issue your voice command immediately. For example, if a prompt is asking “Would
you like to pair a phone, clear a...,” you could press the
button and say, “Pair a Phone” to select
that option without having to listen to the rest of the voice prompt.
See also:
Lap/Shoulder Belt Untwisting Procedure
Use the following procedure to untwist a twisted lap/ shoulder belt.
1. Position the latch plate as close as possible to the anchor point.
2. At about 6 to 12 in (15 to 30 cm) above the latch plate, ...
Trailer And Tongue Weight
Always load a trailer with 60% to 65% of the weight in the front of the trailer.
This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your
vehicle. Loads balanced over the ...
Customer Key Programming
If you have two valid Sentry Keys , you can program
new Sentry Keys to the system by performing the
following procedure:
1. Cut the additional Sentry Key Transponder blank(s)
to match the ignit ...


