Fold And Tumble Rear Seat — Two-Door Models

NOTE:
• Prior to folding the rear seat, it may be necessary to reposition the front seats.

• Be sure that the front seats are fully upright and positioned forward. This will allow the rear seat to fold down easily.

1. Lift the seatback release lever and fold the seatback forward.

Rear Seat Release
Rear Seat Release

2. Slowly flip the entire seat forward.

Folding Rear Seat
Folding Rear Seat

3. Return the seat to the normal position.

4. Raise the rear seatback using the assist strap and firmly lock the seat into position.

    See also:

    Battery Replacement
    The recommended replacement battery is CR2032. NOTE: • Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate • Do not touch the battery terminal ...

    Rear Tail, Stop, Turn Signal, And Backup Lamps
    1. Raise the liftgate. 2. Remove the two push-pins from the tail lamp housing. 3. Grasp the tail lamp and pull firmly rearward to disengage the lamp from the aperture panel. 4. Twist socket c ...

    Help Command
    If you need assistance at any prompt, or if you want to know your options at any prompt, say “Help” following the beep. The Uconnect™ Phone will play some of the options at any prompt if y ...