Opening The Sunrider

1. Unclip and move the sun visors to the side.

2. Release the header latches from the loops on the windshield frame.

3. Grasp the front side bow behind the header, and lift the top.

3. Grasp the front side bow behind the header, and lift the top.

4. Fold back the front section of the top and gently rest the header on top of

4. Fold back the front section of the top and gently rest the header on top of the rear portion of the deck.

5. Fold the top so that the material forms a W as shown.

5. Fold the top so that the material forms a W as shown.

Enter the vehicle and move the material into two folds.

6. Secure the top by using the two provided straps. Each strap will wrap around

6. Secure the top by using the two provided straps. Each strap will wrap around the side bow and Velcro to itself; use one strap on each side of the vehicle.

Closing The Sunrider

    See also:

    Transfer Case
    Fluid Level Check Inspect the transfer case for fluid leaks. If a fluid leak is found, the transfer case fluid level can be checked by removing the filler plug located on the back side of the t ...

    Phonebook Download – Automatic Phonebook Transfer From Mobile Phone
    If equipped and specifically supported by your phone, Uconnect™ Phone automatically downloads names (text names) and number entries from your mobile phone’s phonebook. Specific Bluetooth Phone ...

    Traction Control System (TCS)
    This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced to provide e ...