Loose Fuel Filler Cap Message
After fuel is added, the vehicle diagnostic system can determine if the fuel filler cap is possibly loose, improperly installed, or damaged. A “gASCAP” message will be displayed in the odometer. Tighten the gas cap until a clicking sound is heard. This is an indication that the gas cap is properly tightened. Press the odometer reset button to turn the message off. If the problem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the MIL. Resolving the problem will turn the MIL off.
See also:
Windshield Wiper Operation
Rotate the end of the lever upward to the second detent
past the intermittent settings for low-speed wiper operation.
Rotate the end of the lever upward to the third detent
past the intermittent ...
HSA Off
If you wish to turn off the HSA system, follow this procedure:
1. Start with the engine off and vehicle in PARK (automatic transmission) or
NEUTRAL with clutch out (manual transmission) with wheels ...
Personal Settings (Customer-Programmable Features)
Personal Settings allows the driver to set and recall features when the vehicle
speed is at 0 mph (0 km/h) (manual transmission) or when the shift lever is in PARK
(auto transmission).
Press and ...