Using Automatic Mode
Press the switch rearward and release it within one-half second and the Sky Sliderâ„¢ will open from the front and move automatically toward the rear of the vehicle.
Press the switch forward and release it within one-half second and the Sky Sliderâ„¢ will open from the rear and move automatically toward the front of the vehicle.
NOTE:
• During operation, any movement of the Sky Slider™
switch will stop the Sky Sliderâ„¢ roof.
• To resume the operation from a partially open position, press and release the switch a second time.
• The Sky Slider™ will not open from the front and the rear at the same time. The Sky Slider™ must close fully before opening it from the opposite end.
See also:
Front And Side Impact Sensors
In front and side impacts, impact sensors can aid the
ORC in determining appropriate response to impact
events. ...
Stain Repel Fabric Cleaning Procedure – If Equipped
Stain Repel seats may be cleaned in the following manner:
• Remove as much of the stain as possible by blotting
with a clean, dry towel.
• Blot any remaining stain with a clean, damp towel.
â ...
Jump-Starting Procedure
WARNING!
Failure to follow this procedure could result in personal
injury or property damage due to battery explosion.
CAUTION!
Failure to follow these procedures could result in
damage to th ...


