See also:

To Turn Off
The system will turn off and erase the set speed in memory if: • You push the ON/OFF button. • You turn OFF the ignition. • You switch to Four-Wheel Drive Low. ...

Front Panel(s) Installation With Rear Hard Top Removed
1. Turn the left and right panels over and move the spacer block (located on the rear of the panel) upward 90 degrees. NOTE: The front panel(s) must be positioned properly to ensure sealing. Set ...

Brake Master Cylinder
The fluid level in the master cylinders should be checked whenever the vehicle is serviced. If necessary, add fluid to bring level to the full level mark on the side of the reservoir of the brake ...