Auto-Down
Both the driver and front passenger window switches have an “Auto-Down” feature. Press the window switch past the first detent, release, and the window will go down automatically. To cancel the “Auto-Down” movement, operate the switch in either the up or down direction and release the switch.
To open the window part way, press to the first detent and release it when you want the window to stop.
The power window switches remain active for 10 minutes after the ignition has been turned OFF. Opening either front door will cancel this feature.
See also:
What Causes Corrosion?
Corrosion is the result of deterioration or removal of paint and protective coatings
from your vehicle.
The most common causes are:
• Road salt, dirt and moisture accumulation.
• Stone and gr ...
Required Maintenance Intervals
Refer to the Maintenance Schedules on the following pages for the required maintenance
intervals.
WARNING!
• You can be badly injured working on or around a motor vehicle ...
Manual Compass Calibration
If the compass appears erratic and the “CAL” indicator
does not appear in the EVIC display, you must put the
compass into the Calibration Mode manually as follows:
1. Start the engine. Leave ...