To Deactivate
A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the vehicle will deactivate Electronic Speed Control without erasing the set speed memory. Pressing the ON/OFF button or turning the ignition switch OFF erases the set speed memory.
See also:
Safety
WARNING!
• Improperly inflated tires are dangerous and can
cause collisions.
• Under-inflation increases tire flexing and can result
in over-heating and tire failure.
• Over-inflation re ...
Side Step Removal – If Equipped
NOTE: Prior to off-road usage, the side steps should be removed to prevent
damage.
1. Remove the two nuts from the bodyside.
2. Remove one bolt from the underside of the vehicle.
3. Remove th ...
Reset
• press the button.
• After the “Ready” prompt, and the following beep, say
“Setup”, then “Reset”.
This will delete all phone pairing, phone book entries,
and other settings in ...