Engine Oil Viscosity – 3.6L Engine
SAE 5W-30 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy.
The engine oil filler cap also shows the recommended engine oil viscosity for your vehicle. For information on engine oil filler cap location, refer to “Engine Compartment” in “Maintaining Your Vehicle” for further information.
Lubricants, which do not have both the engine oil certification mark and the correct SAE viscosity grade number, should not be used.
See also:
2010 Jeep Wrangler Unlimited review By Sara Lacey
As parents we mark milestones that show our kids are growing (not fast enough
some days and way too fast on others). Just like some people mark their kid's
height on a wall or doorjamb, a MotherPr ...
Opening Power Shade — Manual Mode
To open the shade, press and hold the switch rearward to
full open. Any release of the switch will stop the movement
and the shade will remain in a partially opened
condition until the switch is ...
To Exit Remote Start Mode And Drive The Vehicle
Before the end of 15 minute cycle, press and release the
UNLOCK button on the RKE transmitter to unlock the
doors and disarm the Vehicle Security Alarm (if
equipped). Then, prior to the end of t ...