Cooling System – Drain, Flush, And Refill
If the engine coolant (antifreeze) is dirty and contains a considerable amount of sediment, clean and flush with reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals. Properly dispose of the old engine coolant (antifreeze).
Refer to the “Maintenance Schedule” for the proper maintenance intervals.
See also:
Engine Block Heater — If Equipped
The engine block heater warms the engine, and permits
quicker starts in cold weather. Connect the cord to a
standard 110-115 Volt AC electrical outlet with a
grounded three-wire extension cord.
...
Road Tire Installation
1. Mount the road tire on the axle.
2. Install the remaining lug nuts with the cone shaped
end of the nut toward the wheel. Lightly tighten the lug
nuts.
WARNING!
To avoid the risk of forcing ...
Display Units In
The EVIC can be changed between English and Metric
units of measure. The units apply to the Outside Temperature,
Average Fuel Economy, Distance to Empty, and
Tire Pressure displays. To make your ...