Sound Horn On Lock
This feature will cause the horn to chirp when the doors are locked with the RKE transmitter. This feature can be turned on or turned off. To change the current setting, proceed as follows:
• For vehicles equipped with the EVIC, refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information.
• For vehicles not equipped with the EVIC, perform the following steps:
1. Press the RKE transmitter LOCK button for 4 to 10 seconds.
2. While the LOCK button is pressed (after four seconds), press the RKE transmitter PANIC button. Release both buttons.
The “Sound Horn On Lock” feature can be reactivated by repeating this procedure.
See also:
Fluid Level Check
The fluid level should be to the bottom edge of the fill hole (A) when the vehicle
is in a level position.
...
Adding A Trailer Hitch
The weight of a trailer/hitch may affect the performance
of ACC. If there is a noticeable change in performance
following the installation of a trailer/hitch, or if the ACC
performance does not ...
On the Trail
Jeep's "Trail Rated" badge, which signals a host of off-road capabilities,
seems superfluous here. With locking front and rear axles, a disconnecting front
stabilizer bar for additional ...