Headlights And Parking Lights
Turn the end of the multifunction lever to the first detent for parking lights and instrument panel lights. Turn to the second detent for headlight operation.
Headlight Switch
NOTE: Lens fogging can occur under certain weather conditions. Turning the headlights on will usually accelerate the clearing process.
See also:
Blind Spot Monitoring — If Equipped
The Blind Spot Monitoring (BSM) system uses two radarbased
sensors, located inside the rear bumper fascia, to
detect highway licensable vehicles (automobiles, trucks,
motorcycles, etc.) that ent ...
Electronic Range Select (ERS) Operation
The Electronic Range Select (ERS) shift control allows the driver to limit the
highest available gear when the shift lever is in the DRIVE position. For example,
if you shift the transmission into ...
Traction Control System (TCS)
This system monitors the amount of wheel spin of each of
the driven wheels. If wheel spin is detected, brake
pressure is applied to the slipping wheel(s) and engine
power is reduced to provide e ...