Automatic Headlights — If Equipped

This system automatically turns the headlights on or off according to the ambient light levels. To turn the system on, turn the end of the multifunction lever to the AUTO position (third detent). When the system is on, the Headlight Time Delay feature is also on. This means the headlights will stay on for 90 seconds after you turn the ignition switch to the LOCK position. To turn the Automatic System off, turn the end of the multifunction lever out of the AUTO position.

Headlight Switch
Headlight Switch

NOTE: The engine must be running before the headlights will turn on in the Automatic mode.

    See also:

    Manual Compass Calibration
    If the compass appears erratic and the “CAL” indicator does not appear in the EVIC display, you must put the compass into the Calibration Mode manually as follows: 1. Start the engine. Leave ...

    Operating Instructions (Uconnect™ Phone) — If Equipped
    Refer to “Uconnect™ Phone” in the Uconnect™ User Manual located on the DVD for further details. ...

    Passenger’s Power Seat
    Some models are equipped with a six-way power passenger seat. The power seat switch is located on the outboard side of the seat. The switch is used to control the movement of the seat and seat c ...