EVIC Main Menu
To step to each main menu feature press and release the MENU button once for
each step. A step from the last item in the list will cause the first item in the
feature list to be displayed. The following features are in the Main menu:
• Compass, Outside Temperature, and ECO display
• Average Fuel Economy
• Distance to Empty
• Elapsed Time
• EVIC Units Selection
• System Status
• Personal Settings
NOTE: For features in the EVIC that can be reset (Average Fuel Economy and Elapsed Time), the EVIC prompts a reset with a SELECT button graphic and the word RESET next to it.
When the SELECT button is pressed, the selected feature will reset and RESET ALL will display next to the SELECT button graphic. Pressing SELECT a second time will reset both Average Fuel Economy and Elapsed Time.
After three seconds without pressing SELECT, RESET ALL will return to RESET and only the selected feature will have been reset.
See also:
Fluid Level Check
Check the fluid level by removing the fill plug. The fluid level should be between
the bottom of the fill hole and a point not more than 3/16 in (4.76 mm) below the
bottom of the hole.
Add fluid, ...
Operating Information And Precautions
The Selec-Trac II active on-demand transfer case provides
four positions:
• Two-wheel drive (2WD) high range
• Four-wheel drive Auto (4WD AUTO) high range
• Neutral (N)
• Four-wheel ...
Language Selection
To change the language that the Uconnect™ Phone is
using:
• Press the button to begin.
• After the “Ready” prompt and the following beep, say
the name of the language you wish to swit ...