Automatic Compass Calibration
This compass is self-calibrating, which eliminates the need to set the compass manually. When the vehicle is new, the compass may appear erratic and the EVIC will display “CAL” until the compass is calibrated. You may also calibrate the compass by completing one or more 360–degree turns (in an area free from large metal or metallic objects) until the “CAL” message displayed in the EVIC turns off. The compass will now function normally.
NOTE: A good calibration requires a level surface and an environment free from large metallic objects such as buildings, bridges, underground cables, railroad tracks, etc.
See also:
Delete Uconnect™ Phonebook Entry
NOTE: Editing phonebook entries is recommended
when the vehicle is not in motion.
• Press the button to begin.
• After the “Ready” prompt and the following beep, say
“Phonebook Delete ...
Display Fuel Saver — If Equipped
The “ECO” message is located in the compass / outside temperature / audio information
/ ECO display. If Display Fuel Saver is selected as ON, only the ECO message will
display in the audio inf ...
Engine Oil Filter
The engine oil filter should be replaced with a new filter
at every engine oil change.
NOTE: For best access to the oil filter, a drive on hoist
should be used instead of a chassis hoist (3.7L On ...