Headlamp

1. Open the hood.

2. Reach behind the headlamp housing to access the headlamp bulb lock ring.

3. Firmly grasp the lock ring and rotate it counterclockwise to unlock it.

4. Remove the bulb and connector assembly from the headlamp housing.

5. Disconnect the bulb from the electrical connector and then connect the replacement bulb.

CAUTION!
Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol.

6. Install the bulb and connector assembly into the headlamp housing and rotate the lock ring clockwise to lock it in place.

7. Close the hood.

    See also:

    Changing FCW Status
    The FCW feature can be set to far, set to near or turned off in the Electronic Vehicle Information Center (EVIC) refer to “Electronic Vehicle Information Center (EVIC)” in “Understanding Y ...

    Reception Quality
    Satellite reception may be interrupted due to one of the following reasons: • The vehicle is parked in an underground parking structure or under a physical obstacle. • Dense tree coverage ma ...

    Driving the Patriot
    The Patriot's smaller engine — a 158-horsepower, 2.0-liter four-cylinder — is technically an option on the Patriot Sport with front-wheel drive, which subtracts $200 from its suggested retail ...