Parksense Display
When the vehicle is in REVERSE, the warning display will turn ON indicating the system status.

Park Assist System ON

Park Assist System OFF
The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone.
As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous.

Slow Tone
Fast Tone

Continuous Tone
The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone.
The following chart shows the warning alert operation when the system is detecting an obstacle:

NOTE: ParkSense will MUTE the radio, if on, when the system is sounding an audio tone.
See also:
General Information
This device complies with Part 15 of the FCC rules and
RSS 210 of Industry Canada. Operation is subject to the
following conditions:
• Changes or modifications not expressly approved by
the p ...
Radio FM
To switch to the FM band, say “FM” or “Radio FM”. In this mode, you may say the
following commands:
• “Frequency #” (to change the frequency)
• “Next Station” (to select the ne ...
Jump-Starting Procedure
WARNING!
Failure to follow this procedure could result in personal
injury or property damage due to battery explosion.
CAUTION!
Failure to follow these procedures could result in
damage to th ...


