Temperature Grades
The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance, which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel, than the minimum required by law.
WARNING!
The temperature grade for this tire is established for
a tire that is properly inflated and not overloaded.
Excessive speed, under-inflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.
See also:
Four–Wheel Drive Models
The manufacturer recommends towing with all wheels OFF the ground. Acceptable
methods are to tow the vehicle on a flatbed or with one end of the vehicle raised
and the opposite end on a towing dol ...
To Turn Off
The system will turn off and erase the set speed in
memory if:
• You push the ON/OFF button.
• You turn OFF the ignition.
• You switch to Four-Wheel Drive Low. ...
Tire Pressure Monitor System (TPMS)
The Tire Pressure Monitoring System (TPMS) will warn the driver of a low tire
pressure based on the vehicle recommended cold placard pressure.
The tire pressure will vary with temperature by about ...