Quick Steps To Raising The Soft Top
Refer to “Raising The Soft Top” in this section for further information.
1. Open the swing gate and raise the top, engaging the Sunrider latches (another person may be needed to help with this operation).
2. Engage header latches.
3. Install rear corner panels.
4. Install side and back windows.
See also:
Headlamps With Wipers (Available with Auto Headlights Only)
When on is selected, and the headlight switch is in the
AUTO position, the headlights will turn on approximately
10 seconds after the wipers are turned on. If the
headlights were turned on by th ...
Axle Lock (Tru–Lok ) — Rubicon Models
The AXLE LOCK switch is located on the instrument panel (to the left of the steering
column).
Axle Lock Switch
This feature will only activate when the following conditions are met:
• Key in ...
Parksense System Usage Precautions
NOTE:
• Ensure that the rear bumper is free of snow, ice, mud,
dirt and debris to keep the ParkSense system operating
properly.
• Jackhammers, large trucks, and other vibrations could
affe ...