Opening The Sunrider

1. Unclip and move the sun visors to the side.

2. Release the header latches from the loops on the windshield frame.

3. Slide the plastic sleeve forward.

3. Slide the plastic sleeve forward.

4. Grasp the header and lift the top back. Make sure the material is folded back

4. Grasp the header and lift the top back. Make sure the material is folded back as shown.

NOTE: The Sunrider latch on the door rail should not be activated for Sunrider use. If activated, the soft top must be reinstalled starting from the sail panels.

5. Locate the straps to secure the side bows. Wrap the straps around the bows

5. Locate the straps to secure the side bows. Wrap the straps around the bows as shown. Repeat on the other side.

6. Reposition the sun visors.

6. Reposition the sun visors.

    See also:

    Weight-Distributing Hitch
    A weight-distributing hitch system works by applying leverage through spring (load) bars. It is typically used for heavier loads, to distribute trailer tongue weight to the tow vehicle’s front a ...

    Uconnect™ Multimedia (Satellite Radio) — If Equipped
    Satellite radio uses direct satellite-to-receiver broadcasting technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius Satellite Radio. This service ...

    Electronic Range Select (ERS) Operation
    The Electronic Range Select (ERS) shift control allows the driver to limit the highest available gear when the shift lever is in the DRIVE position. For example, if you shift the transmission in ...