Downshifting
Moving from a high gear down to a lower gear is recommended to preserve brakes when driving down steep hills. In addition, downshifting at the right time provides better acceleration when you desire to resume speed. Downshift progressively. Do not skip gears to avoid overspeeding the engine and clutch.
WARNING!
Do not downshift for additional engine braking on a slippery surface. The drive
wheels could lose their grip, and the vehicle could skid.
CAUTION!
When descending a hill, be very careful to downshift one gear at a time to prevent
overspeeding the engine which can cause valve damage, and/or clutch disc damage,
even if the clutch pedal is pressed.
See also:
Driver’s Power Seat — If Equipped
The power seat switch is located on the outboard side of
the seat near the floor. Use this switch to move the seat up
or down, forward or rearward or to tilt the seat.
Power Seat Switch
Adjust ...
Supported Medium Formats (File Systems)
The medium formats supported by the radio are ISO 9660
Level 1 and Level 2 and includes the Joliet extension.
When reading discs recorded using formats other than
ISO 9660 Level 1 and Level 2, th ...
Stationary Objects And Vehicles
ACC does not react to stationary objects and stationary
vehicles. For example, ACC will not react in situations
where the vehicle you are following exits your lane and
the vehicle ahead is stopp ...


