Reverse Shifting
To shift into REVERSE, bring the vehicle to a complete stop. Press the clutch and pause briefly to allow the gear train to stop rotating. Beginning from the NEUTRAL position, move the shift lever in one quick, smooth motion straight across and into the REVERSE area (the driver will feel a firm “click” as the shifter passes the “knock-over”). Complete the shift by pulling the shift lever into REVERSE.
The “knock-over” prevents the driver from accidentally entering the REVERSE shift area and warns the driver that they are about to shift the transmission into REVERSE.
Due to this feature, a slow shift to REVERSE can be perceived as a high shift effort.
See also:
Top Tether Strap Attachment
For the center seating position route the tether strap over
the seatback and headrest then attach the hook to the top
tether anchorage located on the back of the seat behind
the gap panel. For t ...
General Information
This system complies with Part 15 of the FCC Operation
is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference r ...
Supplemental Restraint System (SRS) — Air Bags
This vehicle has Advanced Front Air Bags for both the driver and right front
passenger as a supplement to the seat belt restraint systems. The driver’s Advanced
Front Air Bag is mounted in the s ...


