Power Steering Fluid Check
Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as anticipated.
Coordinate inspection efforts through an authorized dealer.
CAUTION!
Do not use chemical flushes in your power steering system as the chemicals can damage
your power steering components. Such damage is not covered by the New Vehicle Limited
Warranty.
WARNING!
Fluid level should be checked on a level surface and with the engine off to prevent
injury from moving parts and to ensure accurate fluid level reading. Do not overfill.
Use only manufacturer’s recommended power steering fluid.
If necessary, add fluid to restore to the proper indicated level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information.
See also:
Electronic Speed Control — If Equipped
When engaged, the Electronic Speed Control takes over
accelerator operations at speeds greater than 25 mph
(40 km/h).
The Electronic Speed Control buttons are located on the
right side of the s ...
Transmission Limp Home Mode
Transmission function is monitored electronically for
abnormal conditions. If a condition is detected that could
result in transmission damage, Transmission Limp Home
Mode is activated. In this ...
Call Termination
To end a call in progress, momentarily press the
button. Only the active call(s) will
be terminated and if there is a call on hold, it will become the new active call.
If the active call is termi ...


