Tire Pressures For High-Speed Operation
The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and reduced vehicle loading may be required for high-speed vehicle operation.
Refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pressures.
WARNING!
High speed driving with your vehicle under load is dangerous. The added strain on
your tires could cause them to fail. You could have a serious collision.
Do not drive a vehicle loaded to maximum capacity at continuous speeds above 75 mph (120 km/h).
See also:
Lap/Shoulder Belt Untwisting Procedure
Use the following procedure to untwist a twisted lap/ shoulder belt.
1. Position the latch plate as close as possible to the anchor point.
2. At about 6 to 12 in (15 to 30 cm) above the latch plate, ...
Key Ignition Park Interlock
This vehicle is equipped with a Key Ignition Park Interlock which requires the
shift lever to be placed in PARK before the ignition switch can be turned to the
LOCK/ OFF position. The key can only ...
Opening The Sunrider
1. Unclip and move the sun visors to the side.
2. Release the header latches from the loops on the windshield frame.
3. Grasp the front side bow behind the header, and lift the top.
4. Fold bac ...