Loose Fuel Filler Cap Message
After fuel has been added, the vehicle diagnostic system can determine if the fuel filler cap is possibly loose, improperly installed, or damaged. If the system detects a malfunction, the “gASCAP” message will display in the odometer display. Tighten the gas cap until a clicking sound is heard. This is an indication that the gas cap is properly tightened. Press the odometer reset button to turn the message off. If the problem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the MIL. Resolving the problem will turn the MIL off.
See also:
Front Turn Signal
1. Open the hood.
2. Turn the turn signal bulb one–quarter turn counterclockwise
to remove from housing.
3. Disconnect the electrical connector and replace the
bulb.
CAUTION!
Do not touch t ...
Without Tip Start – Manual Transmission Only
If the engine fails to start after you have followed the “Normal Starting” or
“Extreme Cold Weather” procedures, it may be flooded. Push the accelerator pedal
all the way to the floor and ...
General Information
This device complies with Part 15 of the FCC rules and
RSS 210 of Industry Canada. Operation is subject to the
following conditions:
• This device may not cause harmful interference.
• This ...