Front Side Marker :: Bulb Replacement :: Maintaining Your Vehicle :: Jeep Wrangler Owner's Manual :: Jeep Wrangler - JeepManuals.org

Front Side Marker

Jeep Wrangler / Jeep Wrangler Owner's Manual / Maintaining Your Vehicle / Bulb Replacement / Front Side Marker

1. Reach under the front fender flare and locate the front side marker socket.

2. Turn the socket assembly counterclockwise 1/3 turn and remove it from the housing. Pull the bulb straight from the socket to replace.

See also:

Changing the Volume
1. Start a dialogue by pressing the Voice Command button. 2. Say a command (e.g., “Help”). 3. Use the ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level while the Voice ...

Cancel Command
At any prompt, after the beep, you can say “Cancel” and you will be returned to the main menu. However, in a few instances the system will take you back to the previous menu. ...

Removing ACC Sensor For Off-Roading
NOTE: When off-roading, it may be advisable to remove the ACC sensor. The sensor is located behind the front lower grille in the center of the vehicle. After removing the lower fascia, you may r ...