Front Fog Lamp
1. Reach under the vehicle to access the back of the front fog lamp.
2. Disconnect the wire harness connector from the front fog lamp connector receptacle.
3. Firmly grasp the bulb by the two latch features and squeeze them together to unlock the bulb from the back of the front fog lamp housing.
4. Pull the bulb straight out from the keyed opening in the housing and then connect the replacement bulb.
CAUTION!
Do not touch the new bulb with your fingers. Oil contamination will severely shorten
bulb life. If the bulb comes in contact with any oily surface, clean the bulb with
rubbing alcohol.
See also:
Electrical Power Outlet
Your vehicle is equipped with a fused 12 Volt (13 Amp)
power outlet. This power outlet is located on the instrument
panel, below the climate controls. It has power
available when the ignition sw ...
Engine Coolant Checks
Check the engine coolant (antifreeze) protection every
12 months (before the onset of freezing weather, where
applicable). If the engine coolant (antifreeze) is dirty or
rusty in appearance, the ...
Bluetooth Communication Link
Mobile phones have been found to lose connection to the
Uconnectâ„¢ Phone. When this happens, the connection
can generally be reestablished by switching the phone
off/on. Your mobile phone is re ...


