How To Engage The Automatic Locking Mode
1. Buckle the combination lap and shoulder belt.
2. Grasp the shoulder portion and pull downward until the entire belt is extracted.
3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the Automatic Locking Mode.
See also:
Towing Requirements
To promote proper break-in of your new vehicle drivetrain components, the following
guidelines are recommended:
NOTE: Trailer towing requires special rear axle lubricant.
Refer to “Fluids, Lubri ...
Replacement Bulbs
LIGHT BULBS – Interior
Bulb ...
Reset
• press the button.
• After the “Ready” prompt, and the following beep, say
“Setup”, then “Reset”.
This will delete all phone pairing, phone book entries,
and other settings in ...


