Remote Unlock Sequence

This feature lets you program the system to unlock either the driver’s door or all doors, on the first press of the UNLOCK button on the RKE transmitter. To change the current setting, refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer- Programmable Features)” in “Understanding Your Instrument Panel” for further information.

    See also:

    Towing Requirements – Trailer Brakes
    − Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer. This could cause inadequate braking and possible personal injury. − An ele ...

    Shift Positions
    For additional information on the appropriate use of each transfer case mode position, see the information below: 2H Position This range is used for normal street and highway driving on hard-surfa ...

    Rear Tail, Stop, Turn Signal, And Backup Lamp
    1. Remove the two inboard screws attaching the tail light housing to the body. DO NOT REMOVE THE OUTER SCREWS AT ANY TIME. 2. Separate the housing from the body by pushing the lamp inboard while ...