Trailer Sway Control – If Equipped
The trailer sway control is a telescoping link that can be installed between the hitch receiver and the trailer tongue. It typically provides adjustable friction associated with the telescoping motion to dampen any unwanted trailer swaying motions while traveling.
See also:
Maintenance Schedule
The Scheduled Maintenance services listed in this
manual must be done at the times or mileages specified
to protect your vehicle warranty and ensure the best
vehicle performance and reliability. ...
Rear Tail, Stop, Turn Signal, And Backup Lamps
1. Raise the liftgate.
2. Remove the two push-pins from the tail lamp housing.
3. Grasp the tail lamp and pull firmly rearward to
disengage the lamp from the aperture panel.
4. Twist socket c ...
Rear Hard Top Installation
NOTE: If the door frames are installed from soft top usage, they must be removed
prior to installation of the hard top.
1. Inspect the hard top seals for damage and replace if necessary.
2. Instal ...