Body Lubrication
Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, sliding doors and hood hinges, should be lubricated periodically with a lithium-based grease, such as MOPAR Spray White Lube or equivalent, to assure quiet, easy operation and to protect against rust and wear. Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit; after lubricating, excess oil and grease should be removed. Particular attention should also be given to hood latching components to ensure proper function.
When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated.
The external lock cylinders should be lubricated twice a year, preferably in the Fall and Spring. Apply a small amount of a high quality lubricant, such as MOPAR Lock Cylinder Lubricant or equivalent, directly into the lock cylinder.
See also:
To Arm The System
The Vehicle Security Alarm will set when you use the Remote Keyless Entry (RKE)
transmitter to lock the doors and swing gate, or when you use the power door lock
switch while the door is open. Aft ...
Manual Compass Calibration
If the compass appears erratic, inaccurate or abnormal, you may wish to calibrate
the compass. Prior to calibrating the compass, make sure the proper zone is selected.
1. Start the engine and leave ...
Mist
Use the Mist feature when weather conditions make
occasional usage of the wipers necessary. Rotate the end
of the lever downward to the Mist position and release
for a single wiping cycle.
NOTE ...