Glass Surfaces
All glass surfaces should be cleaned on a regular basis with MOPAR Glass Cleaner or any commercial household-type glass cleaner. Never use an abrasive-type cleaner. Use caution when cleaning inside rear windows equipped with electric defrosters. Do not use scrapers or other sharp instruments which may scratch the elements.
When cleaning the rearview mirror, spray cleaner on the towel or rag that you are using. Do not spray cleaner directly on the mirror.
See also:
Side Step Removal – If Equipped
NOTE: Prior to off-road usage, the side steps should be removed to prevent
damage.
1. Remove the two nuts from the bodyside.
2. Remove one bolt from the underside of the vehicle.
3. Remove th ...
Protection Of Body And Paint From Corrosion
Vehicle body care requirements vary according to geographic locations and usage.
Chemicals that make roads passable in snow and ice, and those that are sprayed on
trees and road surfaces during ot ...
Lap/Shoulder Belt Untwisting Procedure
Use the following procedure to untwist a twisted lap/ shoulder belt.
1. Position the latch plate as close as possible to the anchor point.
2. At about 6 to 12 in (15 to 30 cm) above the latch plate, ...