How To Disengage The Automatic Locking Mode
Unbuckle the combination lap/shoulder belt and allow it to retract completely to disengage the Automatic Locking Mode and activate the vehicle sensitive (emergency) locking mode.
WARNING!
• The belt and retractor assembly must be replaced if the seat belt assembly Automatic
Locking Retractor (ALR) feature or any other seat belt function is not working properly
when checked according to the procedures in the Service Manual.
• Failure to replace the belt and retractor assembly could increase the risk of injury in collisions.
See also:
Rear Tail, Stop, Turn Signal, And Backup Lamp
1. Remove the two inboard screws attaching the tail light housing to the body.
DO NOT REMOVE THE OUTER SCREWS AT ANY TIME.
2. Separate the housing from the body by pushing the lamp inboard while ...
Life Of Tire
The service life of a tire is dependent upon various
factors including but not limited to:
• Driving style
• Tire pressure
• Distance driven
WARNING!
Tires and the spare tire should b ...
Tire Inflation Pressures
The proper cold tire inflation pressure is listed on the
driver’s side “B” Pillar or rear edge of the driver’s side
door.
The pressure should be checked and adjusted, as well as
inspect ...