Shifting

Shift Pattern
Fully press the clutch pedal before shifting gears. As you release the clutch pedal, lightly press the accelerator pedal.
You should always use first gear when starting from a standing position.
Recommended Vehicle Shift Speeds
To utilize your manual transmission efficiently for both fuel economy and performance, it should be upshifted as listed in recommended shift speed chart. Shift at the vehicle speeds listed for acceleration. When heavily loaded or pulling a trailer these recommended up-shift speeds may not apply.

NOTE: Vehicle speeds shown in the chart above are for 2H and 4H only, vehicle speeds in 4L would be significantly less.
See also:
Programming A Rolling Code
For programming garage door openers that were manufactured
after 1995. These garage door openers can be
identified by the “LEARN” or “TRAIN” button located
where the hanging antenna is a ...
Front/Rear Axle Fluid
For normal service, periodic fluid level checks are not
required. When the vehicle is serviced for other reasons
the exterior surfaces of the axle assembly should be
inspected. If gear oil leaka ...
Voice Command
• For best performance, adjust the rearview mirror to provide at least 1⁄2 in
(1 cm) gap between the overhead console (if equipped) and the mirror.
• Always wait for the beep before speak ...


