Side Step Removal – If Equipped

NOTE: Prior to off-road usage, the side steps should be removed to prevent damage.

1. Remove the two nuts from the bodyside.

2. Remove one bolt from the underside of the vehicle.

2. Remove one bolt from the underside of the vehicle.

3. Remove the side step assembly

3. Remove the side step assembly

    See also:

    At Each Stop For Fuel
    • Check the engine oil level about five minutes after a fully warmed engine is shut off. Checking the oil level while the vehicle is on level ground will improve the accuracy of the oil level re ...

    Occupant Restraints
    Some of the most important safety features in your vehicle are the restraint systems: • Three-point lap and shoulder belts for the driver and all passengers • Advanced Front Air Bags for dri ...

    Electronic Speed Control — If Equipped
    When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h). The Electronic Speed Control buttons are located on the right side of the steer ...