Crossing Logs
To cross a log, approach it at a slight angle (approximately 10 to 15 degrees). This allows one front tire to be on top of the log while the other just starts to climb the log. While climbing the log, modulate your brake and accelerator to avoid spinning the log out from under your tires. Then ease the vehicle off the log using your brakes.
CAUTION!
Do not attempt to cross a log with a greater diameter than the running ground clearance
or the vehicle will become high-centered.
See also:
Jump-Starting Procedures
If your vehicle has a discharged battery it can be jumpstarted
using a set of jumper cables and a battery in
another vehicle or by using a portable battery booster
pack. Jump-starting can be dan ...
Five-Speed Automatic Transmission
The shift lever position display (located in the instrument panel cluster) indicates
the transmission gear range. You must press the brake pedal to move the shift lever
out of the PARK position (r ...
Overview
The Jeep® Liberty has remained a leader in the mid-size sport-utility vehicle
(SUV) market since its introduction in 2002. The popular mid-size SUV gives
off-road enthusiasts and owners their own ...