Seat Belt Maintenance
Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric.
Sun damage will also weaken the fabric.
If the belts need cleaning, use MOPAR Total Clean or equivalent, a mild soap solution, or lukewarm water. Do not remove the belts from the vehicle to wash them. Dry with a soft cloth.
Replace the belts if they appear frayed or worn or if the buckles do not work properly.
See also:
Head Restraints
Head restraints are designed to reduce the risk of injury
by restricting head movement in the event of a rearimpact.
Head restraints should be adjusted so that the top
of the head restraint is lo ...
Front Fog Lights
The front fog light switch is located on the multifunction lever. To activate
the front fog lights, turn on the parking or low beam headlights and pull out the
end of the lever.
NOTE: The fog l ...
Driver’s Power Seat — If Equipped
The power seat switch is located on the outboard side of
the seat near the floor. Use this switch to move the seat up
or down, forward or rearward or to tilt the seat.
Power Seat Switch
Adjust ...